2022, issue 3, p. 87-97

Received 26.09.2022; Revised 24.10.2022; Accepted 15.11.2022

Published 29.11.2022; First Online 10.12.2022

https://doi.org/10.34229/2707-451X.22.3.9

Previous  |  FULL TEXT (in Ukrainian)  |  Next

 

MSC 76N15

Calibrating and Graduating of Multi-Sensor Gas Analyzer

Vitalii Budnyk * ORCID ID favicon Big,   Maksym Mudrenko,   Serhii Lukash,   Mykola Budnyk ORCID ID favicon Big

V.M. Glushkov Institute of Cybernetics of the NAS of Ukraine, Kyiv

* Correspondence: This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Introduction. The article is devoted to the calibration and graduation of the multi-sensor gas analyzer developed at the V.M. Glushkov Institute of Cybernetics of National Academy of Sciences of Ukraine. The modern trend in the development of medical equipment, in particular, containing built-in measuring devices, consists in its miniaturization, intellectualization, the use of information technologies, and the introduction of wireless and network means of data transmission.

The purpose of the article is to design, create electronics and software for recording the concentration of three gases (oxygen, carbon dioxide and carbon monoxide), test and calibrate the device.

Results. Three prototypes of sensor modules for oxygen, carbon dioxide and carbon monoxide have been created. The structure, scheme of connection of sensor modules, and the principle of operation of the gas analyzer was described. Testing and optimization of these prototypes were performed. Auxiliary pneumatic equipment for checking the performance of devices, their calibration and graduation was manufactured. Measurement technique was developed and test measurements of the specified gases were performed. The calibration technique was developed and the device was calibrated using two test gas samples such as ethanol vapor and air-gas mixture of carbon dioxide. In addition, a special software has been developed, which allow observe a registered input signal from sensor modules and store it to the file.

Conclusions. As a result of the work, prototype of the device was created, its testing, calibration and graduation were carried out at the State Enterprise "Ukrmetrteststandart", 4 certificates of metrological attestation were obtained. The gas analyzer can be used for screening of healthy persons based on study of exhalation to predict the risk of diseases.

 

Keywords: multi-sensor gas analyzer, oxygen, carbon dioxide, carbon monoxide, calibration, graduation.

 

Cite as: Budnyk V., Mudrenko M., Lukash S., Budnyk M. Calibrating and Graduating of Multi-Sensor Gas Analyzer. Cybernetics and Computer Technologies. 2022. 3. P. 87–97. (in Ukrainian) https://doi.org/10.34229/2707-451X.22.3.9

 

References

           1.     Budnyk M.M. Optical biomedical devices and their metrological implementation. Tezy dopovidei X mizhnarodnoi naukovo-tekhnichnoi konferentsii «Metrolohiia ta vymiriuvalʹna tekhnika». 5–7 October 2016. Institute of metrology. Kharkiv. 2016. P. 120. (in Ukrainian) http://www.metrology.kharkov.ua/index.php?id=mvt2016

           2.     Khodakovsky M.I., Budnyk M.M., Lebyedyeva T.S., Shpylovyi P.B., Merzhvynskyi P.A., Degtiaruk V.I., Ryzhenko T.M., Tymoshenko Y.M., Gryshchenko L.V., Raschektaeva A.I., Timofeev Y.P. Ensuring unity of measurements in biomedical optical devices. Metrolohiia ta prylady. 2017. No. 1 (63). P. 25–36. (in Ukrainian) https://mmi-journal.org/index.php/journal/issue/view/2

           3.     Khodakovsky M.I., Budnyk M.M., Ryzhenko T.M., Lebedeva T.S., Spilovyi P.B., Mudrenko M.I., Tymoshenko Y.M. Development of metrological support for refractometric measurements based on surface plasmon resonance. Metrology and devices. 2017. No. 5 (67). P. 25–31. (in Ukrainian) https://mmi-journal.org/index.php/journal/issue/view/13

           4.     Khodakovskyi M.I., Budnyk M.M., Ryzhenko T.M., Merzhvynskyi P.A., Mudrenko M.I., Tymoshenko Y.M., Gryshchenko L.V., Raschektaieva A.I., Timofeev Y.P. Optical measurements for non-invasive hemoglobinometry. Ukrainsʹkyi metrolohichnyi zhurnal. 2017. No. 4. P. 53–64. (in Ukrainian) https://doi.org/10.24027/2306-7039.4.2017.125515

           5.     DSTU 2595-94. Measurement devices and functional diagnostic equipment. Kyiv: Derzhstandart. 1994. 43 p. (in Ukrainian) http://shop.uas.org.ua/ua/katalog-normativnih-dokumentiv/11-okhorona-zdorovya/priladi-vimirjuvalni-ta-aparatura-funkcionalnoi-diagnostiki-termini-ta-viznachennja.html

           6.     Ostapenko O.Y., Merzhvynskyi P.A., Lukash S.I. Development of computer program of a carbon dioxide gas analyzer. Biolohichna i medychna informatyka ta kibernetyka (BMIK-2014): materialy shchorichnoi naukovo-tekhnichnoi shkoly-seminaru. Kyiv: V.M. Glushkov Institute of Сybernetics NASU. 2014. P. 116–121. (in Ukrainian) https://www.nas.gov.ua/publications/books/SiteBook/Pages/default.aspx?ffn1=ISBN&fft1=Eq& ffv1=978-966-02-7206-4

           7.     Lukash S.I., Vakal L.P. Development of method of marker gases measurement in breathing air. Kompiuterni zasoby, merezhi ta systemy. 2012. No. 11. P. 84–86. (in Ukrainian) http://dspace.nbuv.gov.ua/handle/123456789/46491

           8.     Lukash S.I., Budnyk M.M. Method of calibration of multisensor gas analyzer and device for its implementation. Patent for invention UA 105054, published 10.04.2014. Official Bulletin “Inductrial Property”. 2014. No. 7. 19 p. (in Ukrainian) https://sis.ukrpatent.org/uk/search/detail/1018034/

           9.     Electronic resource: https://www.umweltsensortechnik.de/en/gas-sensors/mox-gas-sensors-types.html (accessed: 14.09.2022)

       10.     DSTU EN 45544-1:2009. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. Kyiv: Derzhavne pidpryemstvo «UkrNDNT». 2009. 38 p. (in Ukrainian) https://www.en-standard.eu/csn-en-45544-1-workplace-atmospheres-electrical-apparatus-used-for-the-direct-detection-and-direct-concentration-measurement-of-toxic-gases-and-vapours-part-1-general-requirements-and-test-methods/

       11.     Technical conditions of Ukraine (TUU) 24.1-02568182-001:2005 «Gas analysis. Verification gas mixtures. Technical conditions». Kyiv: SE «Ukrmetrteststandart». 2005. 32 p. (in Russian) http://www.ukrcsm.kiev.ua/

       12.     Lukash S.I., Budnyk M.M. Method of calibration of multisensor gas analyzer and device for its implementation. Patent for useful model UA 742134, published 25.10.2012. Official Bulletin “Inductrial Property”. 2012. No. 20. P. 496. (in Ukrainian) https://sis.ukrpatent.org/uk/search/detail/627842/

       13.     Khodakovsky M.I., Degtiaruk V.I., Lukash S.I., Budnyk M.M. Features of metrological certification of optical and gas-analytical medical devices. Zbirnyk naukovykh pratsʹ «Biolohichna i medychna informatyka ta kibernetyka», Editor-in-Chief Budnyk M.M., Kyiv: V.M. Glushkov Institute of Cybernetics NASU. 2019. P. 113–115. (in Ukrainian) https://www.nas.gov.ua/UA/Book/Pages/default.aspx?BookID=0000015616

       14.     Khodakovskyi M.I., Budnyk M.M., Kobzar T.O., Kriachok T.V. Using a multisensor gas analyzer to test the composition of air during human breathing. Control Systems and Computers. 2019. No. 3. P. 60–69. (in Ukrainian) https://doi.org/10.15407/csc.2019.03.060

 

 

ISSN 2707-451X (Online)

ISSN 2707-4501 (Print)

Previous  |  FULL TEXT (in Ukrainian)  |  Next

 

 

            Archive

 

© Website and Design. 2019-2024,

V.M. Glushkov Institute of Cybernetics of the NAS of Ukraine,

National Academy of Sciences of Ukraine.